Lattice Boltzmann method for the simulation of viscoelastic fluid flows

The simulation of viscoelastic fluids is a challenging task from the theoretical and numerical points of view. This class of fluids has been extensively studied with the help of classical numerical methods. In this paper we propose a new approach based on the lattice Boltzmann method in order to simulate linear and non-linear viscoelastic fluids and in particular those described by the Oldroyd-B and FENE-P constitutive equations. We study the accuracy and stability of our model on three different benchmarks: the 3D Taylor–Green vortex decay, the simplified 2D four-rolls mill, and the 2D Poiseuille flow. To our knowledge, the methodology described in this work is a first attempt for the simulation of non-trivial flows of viscoelastic fluids using the lattice Boltzmann method to discretize the constitutive and conservation equations.     

Impulsive synchronization for a chaotic system with channel time-delay

This paper discusses the synchronization of the chaotic system. Some new and less conservative sufficient conditions are established by impulsive control method with channel time-delay and different time-varying parameter uncertainties. An example and its simulations are finally included to visualize the effectiveness and feasibility of the method.     

Effect of high-frequency excitation in regenerative turning of metals and brittle materials

We have analyzed vibrations generated in an orthogonal cutting process. Using a simple single degree of freedom model with friction we have observed the chatter vibrations. In the limit of a high rotational velocity the rough cutting surface combined with a friction phenomenon caused effective damping in the system. For simplicity, we used a harmonic function to describe the profile of the initial surface.     

Apparent and effective drag for circular cylinders oscillating transverse to a free stream

This communication brings forward the concept of an effective drag for circular cylinders undergoing controlled or self-excited oscillation transverse to a free stream. A relationship between the effective drag and the apparent drag customarily measured by force transducers, is derived on the basis of the average rate of energy dissipation in the fluid. The effective drag is employed to gain insight into the fluid dynamics of vortex-induced vibrations using available data from the published literature. It is shown that the effective drag varies almost continuously as a function of the true reduced velocity except for a sudden decrease near conditions of maximum amplitude. The variation displays similarities but also important differences among independent experiments, which highlight the importance of various influencing parameters whose effect on the free response is currently not well understood. Some evidence is found that self-excited oscillations occur at points in the frequency–amplitude space where the effective drag is comparatively low avoiding the region where energy transfer from the fluid to the structure is most efficient. A total energy balance is employed to reveal the effect of mechanical damping on the free response which indicates that the amplitude scales with the inverse of the square root of damping in conformity with experimental data. The dimensionless damping parameters proposed by Vandiver are examined in light of the present analysis, and alternative empirical formulas are suggested for organizing the free vibration response.     

Fourier transforms on Cantor sets: A study in non-Diophantine arithmetic and calculus

Fractals equipped with intrinsic arithmetic lead to a natural definition of differentiation, integration, and complex structure. Applying the formalism to the problem of a Fourier transform on fractals we show that the resulting transform has all the required basic properties. As an example we discuss a sawtooth signal on the ternary middle-third Cantor set. The formalism works also for fractals that are not self-similar.     

预嵌锂用穿孔集流体对锂离子电容器电化学性能的影响

将石墨涂覆于传统铜箔(CCC)与穿孔铜箔(PCC)集流体表面,通过内部短路的方式进行预嵌锂处理,再以商业化的活性炭及预锂化的石墨分别为正、负极材料组装成锂离子电容器(LIC)。以PCC为集流体的LIC在0.1和2.0 A?g~(-1)的电流密度下,能量密度分别为118.2和51.7 Wh?kg~(-1),并且在0.5 A?g~(-1)的电流密度下循环1000次后的能量密度保持率为90%;以CCC为集流体的LIC在0.1和2.0 A?g~(-1)的电流密度下的能量密度分别为125.5和43.3 Wh?kg~(-1),在同等电流密度下2.0-3.8 V之间循环1000次后的能量密度保持率仅为73.2%。进一步研究表明,石墨采用PCC在预嵌锂的过程中避免了金属锂沉积,生成了均一且稳定的固体电解质膜(SEI),有效防止充放电过程中SEI膨胀,活性物质与集流体间粘结力降低,活性物质脱落等现象发生。因此,LIC通过PCC完成预嵌锂后的自放电及内阻更小,具有更佳的倍率性能和循环性能。     

还原氧化石墨烯/碳纳米管/Co_3O_4三元复合材料的制备与电化学性能

将低温水热反应和低温热处理相结合,制备了含还原氧化石墨烯(RGO)、碳纳米管(CNTs)和Co3O4的三元纳米复合材料RGO-CNTs-Co3O4;利用X射线衍射仪、扫描电子显微镜、透射电子显微镜分析了合成产物的相组成和微观结构,分析了其形成过程;并利用电化学测试装置测定了其作为锂离子电池负极材料的电化学性能.结果表明,在合成反应过程中,氧化石墨烯被还原剂肼还原为石墨烯,同时在石墨烯和CNTs表面生成氢氧化钴;再经低温热处理得到RGO-CNTs-Co3O4三元复合材料.Co3O4纳米颗粒均匀分散在由RGO片层和CNTs组成的三维网络结构中;这种三维网络结构既有利于电子和离子的传输,又能够有效抑制Co3O4在脱嵌锂过程中因体积变化引起的结构破坏.总体而言,合成的新型三元复合材料具有高的比容量以及良好的循环性能与倍率性能.     

氮化钨-钨/掺氮有序介孔碳复合材料的制备及其氧还原性能

采用软模板法制备了氮化钨-钨/掺氮有序介孔碳复合材料（WN-W/NOMC）,作为一种高比表面积且价格低廉的阴极氧还原反应催化剂。通过适量添加尿素来改变复合材料中的氮含量,在掺氮量为7%（w/w）时,实验发现材料能够保持完整有序介孔结构,测试其比表面积高达835 m²·g^-1,透射电子显微镜（TEM）测试结果显示其催化颗粒均匀地分散在氮掺杂有序介孔碳载体上。在O₂饱和的0.1 mol·L^-1 KOH溶液中测试了材料的氧还原催化性能（ORR）,显示其起始电位为0.87 V（vs RHE）,极限电流密度为4.49 mA·cm^-2,氧还原反应的转移电子数为3.4,接近于20%（w/w）商业Pt/C的3.8,说明该材料表现出近似4电子的氧还原反应途径。研究结果表明,WN-W/NOMC的催化性能虽然稍弱于商业铂碳（0.99 V,5.1 mA·cm^-2）,但其具有远超铂碳的循环稳定性和耐甲醇毒化能力。     

Gold-nanoparticle on the surface of L-cysteine modified gold electrode and its application

A sensor based on gold nanoparticle on the surface of L-cysteine modified gold electrode is prepared. Electrochemical behavior of dopamine hydrochloride is investigated. The linear relation between peak current of dopamine hydrochloride and scan speed in the range of 10 to 1000 mV s^?1 indicates that a diffusion-adsorption controls the process. The linearity range is 1.05 × 10^?5–7.38 × 10^?4 M with detection limit of 1.05 × 10^?6 M. The recoveries were in the range from 99.8 to 101.5% with relative standard deviations of 1.3 ～ 2.3% (n = 6). The modified electrode under ambient conditions over a period of 2 weeks has an excellent repeatability and reproducibility.     

Coupled frequency-doubling optoelectronic oscillator based on polarization modulation and polarization multiplexing

A coupled frequency-doubling optoelectronic oscillator (OEO) is proposed and experimentally demonstrated, which is constructed based on the perfect combination of polarization modulation and polarization multiplexing. A fundamental microwave signal at 9.95 GHz or a frequency-doubled microwave signal at 19.9 GHz is generated with a wavelength-independent sidemode-suppression ratio (SMSR) as high as 78 dB obtained. The phase noise of the generated 19.9-GHz signal is ? 103.45 dBc/Hz at 10-kHz frequency offset, indicating a good short-term stability. The proposed scheme is simple and flexible, which can find applications in radars and wireless communications.